mobile anderson service

Close-up of a trailer electrical connection with a person's finger pointing at a 50-amp power connector.
A hand holding a small white electronic device connected to red and black wires, with a blue connector hanging at the end, in front of a black surface with a partial red and white logo.
Close-up of a black trailer with a diamond plate metal surface, a black electrical plug, and a yellow reflector, with a partly cloudy sky reflected in the trailer's shiny surface.

This is our premium mobile service for Anderson circuit installs. Whether it be at the rear of your car, the rear compartment, in a canopy, switched (on only with ignition) or live (always has 12v), we can supply and fit a system tailored to meet all your requirements.

Quality and performance is our focus. For this reason we only use tycab cable. All lugs are double crimped, then quality fuses and conduit are used to protect the cable where required. Heat shrink liquid, electrical tape or conformal coating is used on any items outside the above listed protection.

This is an Eastern Melbourne mobile service. We come to you at your home, office or work site. A travel fee applies to Northern and Western Suburbs.

25amp always active

This is our premium mobile service for a 25amp Anderson at the back of vehicle, suitable for caravan charging. This is a non switched system, meaning it is always active. This is best suited to 25amp DCDC chargers and also requires a DCDC to be setup correctly in your caravan.

This Anderson can handle 25amps constant. To achieve this, 8 B&S tycab cable is used, which is protected by a 50amp Midi fuse near the battery.

From

$395

50amp always active

This is our preimum mobile service for a 50amp Anderson at the back of vehicle, suitable for caravan charging. This is a non switched system, meaning it is always active. This is best suited to 40amp-50amp DCDC chargers and also requires a DCDC to be setup correctly in your caravan.

This Anderson plug can handle 50amps constant. To achieve this, 6 B&S tycab cable is used, which is protected by an 80amp Midi fuse near the battery.

From

$495

24v to 12v 70amp

Premium Mobile Service for a 12v Anderson circuit from a 24v alternator system. This service suits those that will be towing a caravan or want a 12v battery system in a 24v truck or motor home. We can provide switched (on only with ignition) or live (always has 12v), we can supply and fit a system tailored to your requirements.

From

$795

25amp switched

This is our preimum mobile service for a switched 25amp Anderson at the back of vehicle,suitable for caravan charging. Best suited to 25amp DCDC chargers. A switched system means it is active only while the ignition is on. This will protect your start battery in your vehicle from your caravan.

This Anderson plug can handle 25amps constant. To achieve this, 8 B&S tycab cable is used, which is protected by a 50amp Midi fuse near the battery. The switching mechanism is a heavy duty narva 68022 relay and is triggered by a fuse tap in the main fuse box.

From

$495

50amp switched

Preimum Mobile Service for a switched 50amp Anderson at the back of vehicle, suitable for caravan charging. Best suited to 40-50amp DCDC chargers. Switched means it is active only while the ignition is on. This will protect your start battery in your vehicle from your caravan.

This Anderson plug can handle 50amps constant. To achieve this, 6 B&S tycab cable is used, which is protected by an 80amp Midi fuse near the battery. The switching mechanism is a heavy duty narva 68022 relay and is triggered by a fuse tap in the main fuse box.

From

$595

custom solutions

Is what your looking for not listed? Well we can help!

We provide professional advice and guidance. From a simple question to a complete system design, we can create a custom solution tailored to meet all your requirements.